845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Sump Pumps
Wayne 1/6 H.P. (Horsepower) WWB WaterBUG submersible water removal pump with Multii-Flow Technology. Our Patent Pending Multi-Flo Technology is key and allows the user, easy selection of the appropriate discharge for the water removal application. The top discharge should be used to drain water from confined spaces; a window well, bath tub, laundry tub, even from 5 Gal. buckets. Side discharge should be selected for easy water removal from open areas; flat roofs, flooded basements, shower stalls or flooded yard. Our Patent Pending multi-ring suction strainer filters debris, keeping it clear from the suction intake which minimizes clogging. This powerful tool pumps up to 1257 GPH (Gallons Per Hour), connects to a standard garden hose and removes water down to a 1/16 In. of the surface, making the area virtually dry. 3/4 In. GH Adapter.
Fully automatic basement protection in the event of a power failure. This system operates on a 12V automotive battery and is self charging. Includes 12V pump, magnetic reed switch with r/t mercury switch, battery case, control panel and battery charger. Pumps up to 25 GPM at 5' vertical lift. 1 year warranty. Battery not included.
The Wayne EEAUP250 1/4 HP (horsepower) water removal pump is ideal for crawl spaces, flat roofs, window wells, and other problem areas around the home where water accumulates. Its energy efficient oil-free motor pumps up to 3,000 GPH (gallons per hour) and removes water down to within 3/8" of the surface. Just plug it in and leave the pump unattended for worry-free water removal. The EEAUP250 senses the presence of water and only operates when needed, and its sealed thermoplastic construction is safe for submersible operation. Automatic On/Off electric water removal pump. iSwitch technology turns pump on and off by sensing the presence of water; removes water down to 3/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/4 HP; max. flow rate is 3000 GPH; 1850 GPH at 10; of discharge lift. 1-1/4" discharge with 3/4" garden hose adapter. Can be left unattended to remove water from flooded basements, window wells, boats, stock tanks, flat roofs, low spots in driveways.
Rugged cast-iron construction makes this 3/10 HP pump ideal for heavy-duty sump pump applications and for grey water effluent applications. Overload protected oil filled motor, 2-pole float operated switch for reliable operation and long life. 1-1/2" discharge pumps up to 1/2" solids. Not intended for pumping unprocessed household sewage or as a sewage ejector pump. 2 year limited warranty. For replacement switch see Model No KH82 (SKU 417076)
The Wayne 1/4 H.P. (Horsepower) is a submersible portable utility pump designed to make water moving tasks easier. Typical applications include removing standing water, draining tanks, and aquariums, emptying clogged sinks and tubs, and boosting water pressure. Portable electric water removal pump lifts water over 25'; removes water down to 1/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/4 HP; max. flow rate is 1050 GPH (gallons per hour); 860 GPH at 10' of discharge lift. 3/4" bronze garden hose adapter at discharge. For removing water where high lift is needed from flooded basements, boats and stock tanks. Assemble in the US with foreign and domestic parts.
1/3 HP (horsepower) submersible sump pump. Cast aluminum body resists corrosion, stress, and heat. Built-in thermal overload protection. 1-1/2 NPT (National Pipe Thread) discharge with a 9' double sealed cord. 1 year limited warranty. Pumps 2780 GPH (gallons per hour) at a 5' lift, 2190 GPH at a 10' lift.
Heavy-duty oil-filled 1/2 HP, 115V motor for superior cooling and bearing lubrication. Cast-iron motor housing provides strength, efficient motor heat transfer, and longer bearing life. 1-piece cast-iron base and screen does not distort and allows for easy installation of discharge pipe and check valve. Strain relieved, 8' grounded power cord. Thermal overload protection automatically shuts motor off when over loaded and resets automatically as motor cools. Mercury magnetic switch. 1-1/2" discharge pipe. Minimum sump pit size, 10" diameter, 12" depth. 2 year limited warranty.
1/6 HP portable utility pump, molded pump housing will not rust or corrode, pumps up to 16 GPM capacity. Removes water to within 1/8" of surface. Fully submersible, completely portable, weighs 8 lbs. Overload protected motor. Adapts to standard garden hose. 3/4" NPT outlet allows for plastic pipe installation. Dimensions: 7-3/4" H. x 6-1/4" W. 1 year limited warranty. Air cooled motor. Fits into 7" opening.
Submersible Sump Pump with vertical switch. Cast aluminum body resist heat with built in thermal overload protection. Fits in a 12" Sump Basin. 1 1/2" NPT discharge. 9' double sealed cord. 1 year limited warranty.
1/4 HP (horsepower) submersible sump pump. Cast aluminum body resists corrosion, stress, and heat. Built-in thermal overload protection. 1-1/2" NPT (National Pipe Thread) discharge with a 9' double sealed cord. 1 year limited warranty. Pumps 2200 GPH (gallons per hour) at a 5' lift, 1620 GPH at a 10' lift.
115V, 60 cycle single phase motor. Overload protected. 3 wire waterproof cord and plug. Enclosed positive switch, corrosion- resistant float rod with adjustable stops. Minimum size of sump pit 12" diameter. Do it thermoplastic base, 1-1/4" discharge, (1/3 H.P.), 1 year limited warranty. 3000 GPH at 5 Ft.
1/3 HP Cast Iron Sewage Pump with thermal overload to protect against overheating. Standard tethered switch provides for automatic operation. Epoxy-coated, cast iron design dissipates motor heat to ensure long pump life. Bottom suction inlet with a vortex impeller. 2 In. discharge with a 2 In. solids-pumping capacity. Ceramic and carbon seal for reliable service and extended life. Temperature rating 130 degrees. Waterproof cord with grounded plug. Weight: 21 Lb. 1 year limited warranty.
1/3 HP Pedestal Sump Pump. Cast iron base with a stainless steel column for stability and long life. 1-1/2 In. discharge. Thermal overload protection will keep the motor from overheating. Waterproof cord with grounded plug. Fits in a 12 In. or larger sump pit. Pumps 3,480 GPH (gallons per hour) at 0 Ft. lift. 2 year limited warranty.
1/2 HP Pedestal Sump Pump. Cast iron base with a stainless steel column for stability and long life. 1-1/2 In. discharge. Thermal overload protection will keep the motor from overheating. Waterproof cord with grounded plug. Fits in a 12 In. or larger sump pit. Pumps 3900 GPH at 0 Ft. lift. 2 year limited warranty.
Portable electric water removal pump, pumps dirty water with small (1/2") solids; removes water down to 3/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/5 HP; max. flow rate is 1700 GPH (gallons per hour); 780 GPH at 10' of discharge lift. 1-1/4" discharge with 3/4" garden hose adapter. For removing water from flooded basements, boats, low-lying outdoor collection spots.